Shop by Department
All
0 0
0
No products in the cart.
LoginRegister
Back to Products
0
No products in the cart.
Menu Categories Search Cart
MS51FB9AE
MS51FB9AE

MS51FB9AE

$0.44

The MS51 is an embedded flash type, 8-bit high performance 1T 8051-based microcontroller. The
instruction set is fully compatible with the standard 80C51 and performance enhanced.
The MS51 contains a up to 16K Bytes of main Flash called APROM, in which the contents of User
Code resides. The MS51 Flash supports In-Application-Programming (IAP) function, which enables
on-chip firmware updates. IAP also makes it possible to configure any block of User Code array to be
used as non-volatile data storage, which is written by IAP and read by IAP or MOVC instruction, this
function means whole 16K Bytes area all can be use as Data Flash through IAP command. MS51
support an function of configurationable Flash from APROM called LDROM, in which the Boot Code
normally resides for carrying out In-System-Programming (ISP). The LDROM size is configurable with
a maximum of 4K Bytes by CONFIG define. There is an additional include special 128 bytes security
protection memory (SPROM) to enhance the security and protection of customer application. To
facilitate programming and verification, the Flash allows to be programmed and read electronically by
parallel Writer or In-Circuit-Programming (ICP). Once the code is confirmed, user can lock the code for
security.
The MS51 provides rich peripherals including 256 Bytes of SRAM, 1K Bytes of auxiliary RAM (XRAM),
Up to 18 general purpose I/O, two 16-bit Timers/Counters 0/1, one 16-bit Timer2 with three-channel
input capture module, one Watchdog Timer (WDT), one Self Wake-up Timer (WKT), one 16-bit auto
reload Timer3 for general purpose or baud rate generator, two UARTs with frame error detection and
automatic address recognition, one SPI, one I2 C, five enhanced PWM output channels, eight-channel
shared pin interrupt for all I/O, and one 12-bit ADC. The peripherals are equipped with 18 sources with
4-level-priority interrupts capability.
The MS51 is equipped with three clock sources and supports switching on-the-fly via software. The
three clock sources include external clock input, 10 kHz internal oscillator, and one 16 MHz internal
precise oscillator that is factory trimmed to ±1% at room temperature. The MS51 provides additional
power monitoring detection such as power-on reset and 4-level brown-out detection, which stabilizes
the power-on/off sequence for a high reliability system design.
The MS51 microcontroller operation consumes a very low power with two economic power modes to
reduce power consumption － Idle and Power-down mode, which are software selectable. Idle mode
turns off the CPU clock but allows continuing peripheral operation. Power-down mode stops the whole
system clock for minimum power consumption. The system clock of the MS51 can also be slowed
down by software clock divider, which allows for a flexibility between execution performance and
power consumption 
(296000 products available)
Quantity

SKU: MS51FB9AE

Categories: E-Components

0.00

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Submit Your Review

Please login to write review!

Upload photos
You can upload up to 6 photos, each photo maximum size is 2048 kilobytes

Related products

Your experience on this site will be improved by allowing cookies Cookie Policy